Solar charger cable is intended for use in photovoltaic power supply systems and similar applications as free hanging, movable, fixed installation and buried in ground in constructional covered systems. The cross-linked materials do not melt or flow at high temperature, high resistance against heat, cold, abrasion, UV.
Solar Charger Cable was originally intended to be a single conductor similar in construction to a Type UF (Underground Feeder) or Type USE-2 (Underground Service Entrance wire rated for 90°C wet applications). The cables can be used indoor, outdoor, in hazard explosion areas, in industry and agriculture. They are suitable for applications in equipment with protective insulation (protecting Class 2).
- Connect the solar panel and Inverter or controller box in Solar power system.
- Halogen Free,Flame-Retardant,RoHS
- Free Sample is available
Solar Charger Cable Product Mix
|Conductor||Fine Wire Tinned Copper Conductor according to BS EN 60228:2005 cl. 5.|
|Core insulation||UV resistant, cross linkable, halogen free, flame retardant compound for core insulation.|
|Sheath colour||Red, black or natural|
|Operating voltage:||300/500v (H05Z-K), 450/750v (H07Z-K)|
|Maximum operating voltage:||2500 volts|
|Temperature range :||
-40°C to +90°C
very good resistance to oil and chemicals with acid and alkaline resistance
Solar power is the conversion of energy from sunlight into electricity, either directly using photovoltaics (PV), indirectly using concentrated solar power, or a combination. Concentrated solar power systems use lenses or mirrors and solar tracking systems to focus a large area of sunlight into a small beam. Photovoltaics were initially solely used as a source of electricity for small and medium-sized applications, from the calculator powered by a single solar cell to remote homes powered by an off-grid rooftop PV system.
|Nominal voltage U0/U||
AC : 1,0/1,0 kV DC : 1,5/1,5 kV